left right
 
 
 
left right
 
 
  CYLINDER OPERATED VALVES    
     
 
     
 
3 WAY OR 2 WAY
LOW TEMPRATURE CCV MODEL CONTROL VALVE
 
  Cylinder Operated Control Valves (Low Temprature)

 

 

3 Way/ 2 Way Pneumatic Cylinder Operated Low Temprature Control Valves
 
SPECIFICATIONS:
Model : CCV-L
Valve Design : 3 Way /2 WayPneumatic Cylinder Operated Control Valves
Pneumatic Cylinder : Single Acting / Double Acting
Size Range : 1/2" to 12"
Material of Construction :
Body   / Bonnet : ASTM A216 Gr.WCB
Trim / Plug : 13 Cr. / S.S.304
Working Temprature : up to 200° Max.
Working Pressure : 7 Kg/cm2
Plug Design : On-Off Type
Testing Standard : BS-6755
End Connection : Mfg. Standard
Leakage Class : Class V
 
   TOP  
 
 
     
 
3 WAY OR 2 WAY
HIGH TEMPRATURE CCV MODEL CONTROL VALVE
 
  Cylinder Operated Control Valve (High Temprature)

 

 

3 Way/ 2 Way Pneumatic Cylinder Operated High Temprature Control Valves
 
SPECIFICATIONS:
Model : CCV-H
Valve Design : 3 Way /2 WayPneumatic Cylinder Operated Control Valves
Pneumatic Cylinder : Single Acting / Double Acting
Size Range : 1/2" to 12"
Material of Construction :
Body   / Bonnet : ASTM A216 Gr.WCB
Trim / Plug : 13 Cr. / S.S.304
Working Temprature : up to 450° Max.
Working Pressure : 7 Kg/cm2
Plug Design : On-Off Type
Testing Standard : BS-6755
End Connection : Flanged Ends ASME B16.5 CL 150
Leakage Class : Class IV
Type Of Bonnet : Cooling Finned Bonnet
 
   TOP  
 
 
     
 
VAC MODEL
LINEAR ACTUATOR
 
  Linear Actuator

 

 

 
 
SPECIFICATIONS:
Bore : 63mm to 300mm
Storke : On request Upto 2500 mm.
Storke Adjustment : Provided for small adjustment of travel
Pressure : 12 bar Maximum
Temp.Range : -20° C to 80° C (viton seat upto 150° C)
 
   TOP  
 
 
     
 
CYLINDER OPERATED
 GATE VALVES
 
  Gate valve

 

 

 
 
SPECIFICATIONS:
End Connection : Flanged and / or lugged to ANSI B 16.5 RF 150# But Wold Ends to ANSI B 16.5
Face toFace : ANSI B 16.10
Manufacturing Std : API 600
Inspection Testing Std : API 598
 
   TOP  
 
 
     
 
CYLINDER OPERATED
 KNIFE GATE VALVE
 
  Knife Gate valve

 

 

 
ISO PNEUMATIC CYLINDER OPERATED KNIFE GATE VALVE
SPECIFICATIONS:
Type : Normally Close / Open
Actuator : Single / Double Acting Pneumatic Cylinder
Size Range : 2" to 40 "
Valve Body : S.Steel / Cast Iron
Gate(Plate) : S.Steel / Cast Steel
Seat : Metal to Metal & Rubber Seated
Pneu.PreSS : 4 to 12 Bar
Temprature : Upto 200° C (250° C On request)
Ends : 150# / 300# / 600#
Application : Air, water, Oils, Gas & Steam & Hydraulic Oils
 
   TOP  
 
 
     
Copyright@ 2010  All rights reserved.